Stainless steel pipes (corrugated, movable and bendable) - it is suitable for pressure distribution of drinking and domestic water (internal and external pipe lines, connection of boilers, flow heaters, etc.), central heating systems (connection of heating system, radiators,
- DN16 stainless steel single pipe 1 x DN16 with EPDM HT 13mm insulation, with PVC protective film
- 1x brass fitting 3/4 thread, 1x HT gasket, 1x bonded half-rings
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
Stainless Pipe (corrugated, movable and bendable) - suitable for pressurized potable and domestic water distribution (indoor and outdoor piping, connecting
Deformation screw DN 16 (3/4 thread) The deformation screw is used to shape the stainless steel solar pipe, this shaping achieves a throat which can then be caught by the matrix<
Stainless steel pipes (corrugated, movable and bendable) - it is suitable for pressure distribution of drinking and domestic water (internal and external pipe lines, connection of boilers, flow heaters, etc.), central heating systems (connection of heating system, radiators,
Stainless Extension Hose PROFI S for drinking water with stainless steel nozzles Product description: hygienic test for drinking water HK/W/0728/01/2014, SZU Brno, Nr. 39-10360 pipe: austenitic steel AISI 304L (high tensile stainless steel with a high degree of expansion) fittings: stainless steel AISI 303 according to EN 10226-1 (in swivel section with flange for flat seal) max. working temperature: 250 °C max. working pressure: 10 bar thread size in inches: from 1/2 to 6/4
T-piece 90° - internally threaded - N - 88,9-Rp3/4 -88,9mm
T-piece 90° - with male thread - N - 22-R3/4 -22mm
T-piece 90° - with male thread - N - 35-R5/4 -35mm