- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
- 2 x DN16 or 2 x DN20 L= 15 m or 20 m with guide cable and 13 mm thick EPDM HT insulation
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
- 1x brass fitting 3/4 thread, 1x HT gasket, 1x bonded half-rings
Stainless steel pipes (corrugated, movable and bendable) - it is suitable for pressure distribution of drinking and domestic water (internal and external pipe lines, connection of boilers, flow heaters, etc.), central heating systems (connection of heating system, radiators,
Stainless Pipe (corrugated, movable and bendable) - suitable for pressurized potable and domestic water distribution (indoor and outdoor piping, connecting
- DN16 stainless steel single pipe 1 x DN16 with EPDM HT 13mm insulation, with PVC protective film
Solar brass nut (set - DN20) size 1" is used to terminate the solar pipe. This set includes: 1x Solar brass nut - 1"2x half ring for brass end (serves as a nut retainer)1x gasket
Stainless steel pipes (corrugated, movable and bendable) - it is suitable for pressure distribution of drinking and domestic water (internal and external pipe lines, connection of boilers, flow heaters, etc.), central heating systems (connection of heating system, radiators,
Deformation screw DN 20 (1 thread) The deformation screw is used to shape the stainless steel solar pipe, this shaping achieves a throat which can then be caught by the matrix
The brass nut (set - DN12) size 1/2" is used to close
Deformation screw DN 16 (3/4 thread) The deformation screw is used to shape the stainless steel solar pipe, this shaping achieves a throat which can then be caught by the matrix<
Deformation screw DN 12 (1/2 thread) The deformation screw is used to shape the stainless steel solar pipe, this shaping achieves a throat which can then be caught by the matrix<