The end sewer flap DN 200 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the end sewer flap DN 200: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end of the drainage pipe, The valve has successfully passed a series of tests required by PN-EN 13564 and has been awarded the CE marking The drainage end valve DN 200 is made of high quality polypropylene with the addition of a stabiliser to increase resistance to sunlight and other weathering influences. Polypropylene is harmless to the natural environment, resistant to high temperatures (up to 95°C) and to aggressive chemicals contained, for example, in plant protection products. The non-return valve is equipped with a chrome-nickel cover A to protect the flapper and seal, as well as a chrome-nickel cover B for the lever. Protects against rodents, weather and environmental influences (e.g. river current). The end sewer flapper is installed by plumbers at the end of sewer pipes entering collection chambers, septic tanks and on pipes diverting storm water into ditches or rivers. Technical drawing:
The end sewer flap DN 160 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the end sewer flap DN 160: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end
The end sewer flap DN 110 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the sewer end flap DN 110: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end
A manhole bottom backflow preventer is a device that effectively blocks the backflow of sewage. Advantages of a backflow preventer: effective protection of buildings low cost and easy installation possibility of removing the check damper on the ground surface without entering the manhole no need to call a specialist for maintenance resistance to corrosion, negative temperatures and chemicals the valve has successfully passed a series of tests required by PN-EN 13564 and has been awarded the CE marking The
The sewer backflow preventer DN 125 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. This backflow preventer shall be mounted horizontally. Advantages and use of the sewer backflow preventer DN 125: made of high quality, corrosion-resistant, durable polypropylene, resistant to negative temperatures and chemicals effectively protects against rodents prevents the release of unpleasan
The sewer backflow preventer DN 160 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. People also sometimes use the DN 150 designation, however, these dampers are identical. It is always the same product, namely DN 160. This check damper must be installed horizontally. Advantages and uses of the sewer check valve DN 160: made of high quality, corrosion-resistant, durable polypropyle
The sewer backflow preventer DN 110 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. People also sometimes use the DN 100 designation, however, these dampers are identical. It is always the same product, namely DN 110. This check damper must be installed horizontally. Advantages and uses of the DN 110 sewer check valve: made of high quality, corrosion-resistant, durable polypropyle
The sewer backflow preventer DN 200 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. This backflow preventer shall be mounted horizontally. Advantages and use of the sewer backflow preventer DN 200: made of high quality, corrosion-resistant, durable polypropylene, resistant to negative temperatures and chemicals effectively protects against rodents prevents the release of unpleasan
The KOMPAKT 1600 sewage pumping shaft is a watertight, fully equipped small pumping station designed for pumping sewage and sludge. This sewage pumping shaft is mainly used where gravity connection to the public sewage network is not possible, i.e. it is necessary to overcome the height difference from the inlet to the sewage network. The KOMPAKT 1600 sewage pumping shaft enables the removal of wastewater or drainage water from remote places such as: detached residential buildings and housing estates indu
The MIDI 1300 sewage pumping shaft is a watertight, fully equipped small pumping station designed for pumping sewage and sludge. This sewage pumping shaft is mainly used where gravity connection to the public sewage network is not possible, thus it is necessary to overcome the height difference from the inlet to the sewage network. The MIDI 1300 sewage pumping shaft enables the removal of wastewater or drainage water from remote locations such as: detached residential buildings and housing estates industr
The MIDI 1600 sewage pumping shaft is a watertight, fully equipped small pumping station designed for pumping sewage and sludge. This sewage pumping shaft is mainly used where gravity connection to the public sewage network is not possible, thus it is necessary to overcome the height difference from the inlet to the sewage network. The MIDI 1600 sewage pumping shaft enables the removal of wastewater or drainage water from remote locations such as: detached residential buildings and housing estates industr
The submersible sludge pump IBO WQ 1500 Professional is designed for professional use. It is designed to work in demanding conditions. This submersible pump can be used for draining flooded rooms, drainage ditches, well excavations and sewer manholes. It is also successfully used in pumping stations. The pump is equipped with thermal protection against motor overload.
Condensate pump CONIBO 1 is designed for condensate drainage, cooling, heating and air conditioning systems. The pump is fully automatic and its operation is very simple. The CONIBO 1 pump has automatic overflow protection. When the condensate is full, the pump automatically starts and drains the condensate through the 6m long hose included in the package. Technical parameters: tank capacity: 1.9 l Hose length: 6 m Pipe connection: 3/8 Stroke height: 4.5 m Delivery capacity: 5.5 l/min. Power: (230V) 80W
The submersible sludge pump IBO WQ 1100 Professional is designed for professional use. The IBO WQ 1100 Professional submersible sludge pump is designed to work in demanding conditions. IBO PROFI pumps can be used to drain flooded rooms, drainage ditches, extra excavations, wells and sewer manholes. These pumps are also successfully used in pumping stations. The pump is equipped with thermal protection, against motor overload.
The submersible sludge pump IBO WQ 1300 Professional is designed for professional use. The IBO WQ 1300 Professional submersible sludge pump is designed to work in demanding conditions. IBO PROFI pumps can be used to drain flooded rooms, drainage ditches, extra excavations, wells and sewer manholes. These pumps are also successfully used in pumping stations. The pump is equipped with thermal protection, against motor overload.
The SANIBO Mini pumping station is designed for pumping water from bathtubs, washbasins, shower trays, washing machines and dishwashers, while not exceeding the maximum temperature of 45°C of the pumped liquid. It is not recommended for use for kitchen sinks due to the lack of a shredder in the pumping station. Possibility of connecting several devices simultaneously, e.g. sink, cabin, bidet, etc. Set includes: pump accessories / caps for unused nozzles set of metal caps Technical parameters: stroke heigh