Solar pump unit single pipe, electric pump - without regulation
Solar pump unit IVAR.SOLAR K - double pipe, electric pump - without regulation
Solar pump unit IVAR.SOLAR K - with IVAR.SOLAR IMTDC control
Solar pump unit IVAR.SOLAR K - with IVAR.SOLAR ILTDC control
Solar pump unit IVAR.SOLAR K - with IVAR.SOLAR ISTDC control
Hand pump for filling solar systems Designed for filling antifreeze into solar circuit it is a piston air pump with a 3 dm3 tank allows pressurisation of the device up to 4 bar
Solar brass nut (set - DN20) size 1" is used to terminate the solar pipe. This set includes: 1x Solar brass nut - 1"2x half ring for brass end (serves as a nut retainer)1x gasket
Socket set - for pipe IVAR.SOLAR INOX - 2x dia. 16; set
Socket set - for pipe IVAR.SOLAR INOX - 2x diameter 20; set
- DN16 stainless steel single pipe 1 x DN16 with EPDM HT 13mm insulation, with PVC protective film
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and cable for sensor, for solar medium, for solar collectors.
The brass nut (set - DN12) size 1/2" is used to close
Flat frame solar collector IVAR.SOLAR 210 M4 - vertical - 1244x1711x86mm; area 2,13m2
Flat frame solar collector IVAR.SOLAR 260 M4 - vertical - 1244x2121x86mm; area 2,64m2
- 1x brass fitting 3/4 thread, 1x HT gasket, 1x bonded half-rings