Technical information and equipment:
DN50
connection 1 1/4 female thread
EPP thermal insulation
charging and draining valve
manual venting
seals to EPDM fittings
external dimension with insulation:
depth: 145 mm, height: 413 mm, width: 115 mm
volumetric flow rate: 1000 / 2000 / 3000 l/hr power at ∆t 20K: 23 / 46 / 70 kW pressure drop at primary: 2 / 6 / 14 mbar flow velocity at turnout: 0,14 / 0,27 / 0,41 m/s
- for hydraulic switch HVA2 - 2x carrier - 4x screws - dowels
- always installed as a collector end piece - possibility to extend the HPW-BN header by 1 circuit including hydraulic switch Technical information and equipment: power output 60kW, at ∆t = 20K DN40 x 1.5 EPP thermal insulation for boiler assemblies connection spacing 125 mm, 1 female thread manifold outlet 5/4 male thread with gasket 2 pcs of nipples included
- always installed as a collector end piece - option to expand the HPW-BG header by 1 circuit including a hydraulic turnout Technical information and equipment: power up to 185 kW, at Δt = 20K flow rate 7,95 m3/h DN 54 x 1.5 for boiler assemblies connection spacing 160 mm, 1 1/2 female thread 2 manifold outlet with overflow nut EPP thermal insulation includes 2 x nipple
Immergas sonda teploty za anuloid pre Victrix PRO pre 1-2 kotly
The float switch is used in conjunction with submersible sump or submersible pressure pumps. The switch automatically switches the pump on or off depending on the water level. By changing the position of the weights on the inlet cable, it is possible to control the level at which the float switch should switch the pump on or off. The float switch is watertight. Includes special connection cable H07 RNF, length 0,5 m.
The float switch is used in conjunction with submersible sump or submersible pressure pumps. The switch automatically switches the pump on or off depending on the water level. By changing the position of the weights on the inlet cable, it is possible to control the level at which the float switch should switch the pump on or off. The float switch is watertight. Includes special connection cable H07 RNF, length 10m.
The float switch is used in conjunction with submersible sump or submersible pressure pumps. The switch automatically switches the pump on or off depending on the water level. By changing the position of the weights on the inlet cable, it is possible to control the level at which the float switch should switch the pump on or off. The float switch is watertight. Includes special connection cable H07 RNF, length 5m.
S4 6/21 4 submersible pump for boreholes and wells - hydraulic part
S4 6/14 4 submersible pump for boreholes and wells - hydraulic part
S4 4/4 submersible 4 pump for boreholes and wells - hydraulic part
S4 6/10 4 submersible pump for boreholes and wells - hydraulic part
S4 4/62 4 submersible pump for boreholes and wells - hydraulic part
S4 4/9 4 submersible pump for boreholes and wells - hydraulic part
S4 12/13 4 submersible pump for boreholes and wells - hydraulic part
S4 4/7 4 submersible pump for boreholes and wells - hydraulic part