Auxiliary nipple 22 mm

Auxiliary nipple 22 mm

Stainless steel pipe nipples are used to reinforce the pipe and to form a precise circle. They also serve as a pipe end calibration, where they cover sharp edges after cutting.

This particular nipple is suitable for pipe diameter 22 mm

Detachable couplings of straight design (straight design). Used for joining polybutylene pipe and copper pipe. They can be used for radiator heating, drinking water and underfloor heating. The inner jaws trap the pipe and do not allow it to slide out. When dismantling, simply unlock the coupling with a special tool and remove the pipe.







HEPWORT system highlights that should be of interest to you during self-assembly











Fully disassembled system.





This means you can assemble the system, disassemble it later, and reassemble it again. This makes sense when you are not quite sure about the heating installation.

kúpiť
Pridať hodnotenie
Auxiliary nipple 28 mm

Auxiliary nipple 28 mm

Stainless steel pipe nipples are used to reinforce the pipe and to form a precise circle. They also serve as a pipe end calibration, where they cover sharp edges after cutting. This particular nipple is suitable for pipe diameter 28 mm Detachable couplings of straight design (straight design). They are used for joining polybutylene pipe and copper pipe. They can be used for radiator heating, drinking water and underfloor heating. The inner jaws trap the pipe and do not allow it to slide out. When dismantl

kúpiť
Auxiliary nipple 10 mm

Auxiliary nipple 10 mm

Stainless steel pipe nipples are used to reinforce the pipe and to form a precise circle. They also serve as a pipe end calibration, where they cover sharp edges after cutting. This particular nipple is suitable for a pipe diameter of 10 mmThis dimension is suitable for wall heating only. Direct fit couplings (straight design). They are used for joining polybutylene pipe and copper pipe. They can be used for radiator heating, drinking water and underfloor heating. The inner jaws trap the pipe and do not a

kúpiť
Auxiliary nipple 15 mm

Auxiliary nipple 15 mm

Stainless steel pipe nipples are used to reinforce the pipe and to form a precise circle. They also serve as a pipe end calibration, where they cover sharp edges after cutting. This particular nipple is suitable for 15 mm diameter Detachable couplings of straight design (straight design). Used for joining polybutylene pipe and copper pipe. They can be used for radiator heating, drinking water and underfloor heating. The inner jaws trap the pipe and do not allow it to slide out. When dismantling, simpl

kúpiť
HT nipple Typ: HT coupler 110

HT nipple Typ: HT coupler 110

The outlet nipple is used to connect the pipe outside the throat.

kúpiť
HT nipple Typ: HT coupler 50

HT nipple Typ: HT coupler 50

The outlet nipple is used to connect the pipe outside the throat.

kúpiť
HT nipple Typ: HT coupler 40

HT nipple Typ: HT coupler 40

The outlet nipple is used to connect the pipe outside the throat.

kúpiť
HT nipple Typ: HT coupler 32

HT nipple Typ: HT coupler 32

The outlet nipple is used to connect the pipe outside the throat.

kúpiť
HT nipple Typ: HT coupler 75

HT nipple Typ: HT coupler 75

The outlet nipple is used to connect the pipe outside the throat.

kúpiť
Fittings with nipple - male thread, 1/2 M x 20 x 2, ALU

Fittings with nipple - male thread, 1/2 M x 20 x 2, ALU

Fasteners with nipple, IVAR.RR 4608 N SET, size: 1/2 M x 20 x 2, ALPEX, packing: 1 in bag / 50 in whole box PN 10, T= +120°C Nipple for 1/2 male thread, male fitting for Alpex (IVAR.TA)

kúpiť
Clamp fitting set with nipple- 1/2 Fx15x1 CU IVAR.RR 4613 N SET

Clamp fitting set with nipple- 1/2 Fx15x1 CU IVAR.RR 4613 N SET

Set of clamp fittings with nipple- 1/2 Fx15x1 CU PN 10, T = +120 °C Nipple male or female thread 1/2 or 3/4 , clamp fitting for Cu (IVAR.TR), ALPEX (IVAR.TA) or PEX (IVAR.TP) IVAR.RR 4608 N - male thread

kúpiť
Clamp fitting set with nipple- 1/2 Mx16x2 ALU IVAR.RR 4608 N SET

Clamp fitting set with nipple- 1/2 Mx16x2 ALU IVAR.RR 4608 N SET

Set of clamp fittings with nipple- 1/2 Mx16x2 ALU PN 10, T = +120 °C Nipple male or female thread 1/2 or 3/4 , clamp fitting for Cu (IVAR.TR), ALPEX (IVAR.TA) or PEX (IVAR.TP) IVAR.RR 4608 N - male thread

kúpiť
Snug fitting with nipple - female thread, 3/4 F x 17 x 2, PEX

Snug fitting with nipple - female thread, 3/4 F x 17 x 2, PEX

Fastener with nipple, IVAR.RR 4613 N SET, size: 3/4" F x 17 x 2, PEX, packing: 1 in bag / 50 in box PN 10, T=+120°Cnipple for 3/4" female thread, fastener for PEX (IVAR.TP)

kúpiť
Snug fitting with nipple - female thread, 3/4 F x 20 x 2, PEX

Snug fitting with nipple - female thread, 3/4 F x 20 x 2, PEX

Fastener with nipple, IVAR.RR 4613 N SET, size: 3/4" F x 20 x 2, PEX, packing: 1 in bag / 50 in whole box PN 10, T=+120°Cnippet for 3/4" female thread, fastener for PEX (IVAR.TP)

kúpiť
Clamp fitting with nipple - male thread, 3/4 M x 15 x 1, CU

Clamp fitting with nipple - male thread, 3/4 M x 15 x 1, CU

Fastening with nipple, IVAR.RR 4608 N SET, size: 3/4" M x 15 x 1, COPPER, packing: 1 in bag / 50 in whole box PN 10, T= + 120°Cnipple for 3/4" male thread, countersunk fitting for copper (TR)

kúpiť
Fittings with nipple - male thread, 3/4 M x 16 x 2, ALU

Fittings with nipple - male thread, 3/4 M x 16 x 2, ALU

Fastening with nipple, IVAR.RR 4608 N SET, size: 3/4" M x 16 x 2, ALPEX, packing: 1 in bag / 50 in whole box PN 10, T=+120°Cnipple for 3/4" male thread, countersunk fitting for Alpex (TA)

kúpiť